Proceed as follows to add a new device to the icom Connectivity Suite.

  1. Click on plus blue [blue]*ADD DEVICE on the Devices page.

  2. Select the type of device to be added in the Add device window.

    • icom OS - INSYS router with icom OS operating system (MRX, MIRO, MRO, ECR and SCR)

    • INSYS OS - INSYS router with INSYS OS operating system (MoRoS, EBW and IMON)

    • 3rd Party - PCs or devices such as controls, cameras or other routers from third-party vendors

  3. Enter the Device serial number (only for INSYS devices), which can be found on the label on the device.

  4. Enter a Device name that describes the device clearly that it can be distinguished from other devices.

  5. Assign an available Licence to the device.

  6. Specify (only if your icom Connectivity Suite is configured for China VPN) whether the device to be added is installed in mainland China or another country in the world.

  7. Activate Default monitoring if the accessibility of the device is to be monitored.

  8. Optionally, enter a Device code (only for INSYS devices). This is used for router configuration via the quick start wizard. If no individual device code is specified here, the default code is used (configurable in the classic view (click on arrow u left top in the title bar) under My VPN → Set Default Code. Moreover, this code will also be used as password fpr accessing the router via a web proxy.

  9. Click on NEXT

  10. Assign a Group to the device.

  11. Enter the Accessible IP address together with the Netmask via which the device should be accessible in the VPN network.

  12. Select the IP network of the router to which the device is to be assigned (only for icom OS devices if more than one IP network is available).

  13. Activate the Netmapping checkbox (only for INSYS devices) and enter the Router/LAN IP to which the netmapping is supposed to take place and which the router has in the local network. If netmapping is not enabled, there is no netmapping and the router will be configured to the previously specified Accessible IP.

  14. Optionally, click on the ADD NEW NETWORK button (only for icom OS devices) to add another network of this router to the VPN network.

    1. Proceed as described for the first network to add this additional router network to the VPN network.

    2. Assign this additional router network to a port on the router.

  15. Now check (only for icom OS devices) the assignments of the networks to the ports and adjust them if necessary by selecting the options Manually assign networks to ports or Do not configure networks or ports.

  16. Click on ADD to add the router to the icom Connectivity Suite.

The device will appear in the Devices list.

Note Examples of the procedure for creating a device in the new user interface compared to the previous user interface can be found here:
- Adding an icom OS router with netmapping / additional routes
- Adding an INSYS OS router with netmapping / additional routes
- Adding a PC

Back to icom Connectivity Suite Portal - Overview